![]() ![]() The Dremel Velocity definitely has the power and speed that you’d want from a Pro-level multi-tool, but its noise, cumbersome ergonomics, and lack of vibration control might get on your nerves. While you’ll need hearing protection with any of our multi-tools, the Velocity is a full 10 dB(A) higher than the quietest. At 102 dB, it’s not the loudest model in our tests, but it also isn’t too far off from that mark. It might not surprise you too much to find that the Dremel Velocity, with all its raw power and vibration, also generates a fair bit of noise. The Dremel Velocity is near the bottom of the group – a disappointing result considering the long cutting/scraping intention of its design. ![]() Fein owns the vibration control category and there are others that do an admirable job. Depending on how much effort the manufacturer does or doesn’t put into vibration dampening technology, these vibrations can cause some discomfort if the tool sees some extended, uninterrupted use. Oscillating multi-tools tend to vibrate a fair amount thanks to their designed action. That puts it right behind the Festool Vecturo, and the Rockwell Sonicrafter AW400 which also has a 5° option. Overall, it finished 3rd in our speed testing with an average plunge cut speed of 11.7 seconds. It has nine different speed settings on its variable speed dial, ending with the somewhat foreboding “Hyper Speed” setting. Most oscillating multi-tools are around 3.6°. Anyway, the Dremel Velocity employs a 5° oscillation arc for aggressive cuts.
0 Comments
Leave a Reply. |